Error codes

Error code	Error description
F152	Channel Errors If only this error is displayed, it is probably a two-channel device and the error cause is located in the other channel. Otherwise, observe the other error messages!
F702	Superordinate message. Please observe the other error messages!
F70E	Superordinate message. Please observe the other error messages!
F707	No feedback voltage The power supply is not correctly connected. The sense line is not correctly connected. No sense connection exists.
FA01	Initialization error Incorrect setting in parameter P-0-0150. Wiring error
FA49	Feedback process channel error (1Vss) The amplitude of the analog signal is too small -> check the connection.
F4A5	SoE Communication Parameter Error (see section “Error F4A5”)

	Consequential error! Please contact the Beckhoff applications department if the servo drive displays consequential errors that are not described in this section!