RSTFW
ASCII - Command | RSTFW |
|
| |
Syntax Transmit | RSTFW [Data] |
| ||
Syntax Receive | RSTFW <Data> | Available in |
| |
Type | rw | MMI | No | |
ASCII Format | Integer8 | CANBus Object Number | 36DA (hex) | |
DIM |
| PROFIBUS PNU | 1674 (dec) IND = 0001xxxx (bin) | |
Range | 0 .. 1 | DPR | 474 (dec) | |
Default | 0 |
| ||
Opmode | All | Data Type Bus/DPR | Integer8 | |
Drive State |
| Weightning |
| |
Start Firmware | 5.70 |
| ||
Configuration | No | Revision | 2.0 | |
Function Group | Basic Setup | EEPROM | - | |
Short Description |
| |||
Description
The command RSTFW defines the configuration of function RSTVAR .
- RSTFW=0 all parameters are reset to the actual default-data.
- RSTFW=345 all parameters are reset to the actual default-data of firmware -version 3.45.