ACTIVE
ASCII - Command | ACTIVE |
|
| |
Syntax Transmit | ACTIVE |
| ||
Syntax Receive | ACTIVE <Data> | Available in |
| |
Type | Variable ro | MMI | Yes | |
ASCII Format | Integer8 | CANBus Object Number | 3504 (hex) | |
DIM | - | PROFIBUS PNU | 1604 (dec) IND = 0000xxxx (bin) | |
Range | 0, 1 | DPR | 4 (dec) | |
Default | - |
| ||
Opmode | All | Data Type Bus/DPR | Integer8 | |
Drive State | - | Weightning |
| |
Start Firmware | 1.20 |
| ||
Configuration | No | Revision | 1.3 | |
Function Group | Drive Status | EEPROM | No | |
Short Description | Output stage active/inhibited | |||
Description
The ACTIVE command returns the present status of the output stage.
- ACTIVE=1 output stage is active/enabled
- ACTIVE=0 output stage is inhibited/disabled
The following conditions must be met to enable the output stage, depending on the controller configuration: