Cables

Beckhoff offers pre-assembled cables for faster and flawless installation of the stepper motor drives. These cables are tested with regard to the material used, shielding and connection type. Perfect functioning and compliance with legal regulations, such as EMC and UL, are guaranteed. The use of other cables can cause unexpected faults and result in exclusion of warranty.

Beckhoff supplies pre-assembled connection cables. Mating connectors are not included in the scope of supply. For the selection of the necessary cables, refer to the Beckhoff documentation for the connecting cables [+]. In the documentation you will find a complete overview of the available cables and information on the technical data.

Cables 1:

Hint for trouble-free application and assembly:

    • Wiring in accordance with applicable regulations and standards
    • Pre-assembled and shielded Beckhoff cables
    Cables 2:

    Connection cables for ASI8100

    You need three different types of cable to connect the ASI8100:

    1. Power cable for power supply
    2. Sensor cable for I/O connection
    3. EtherCAT cable for communication connection

    Notice

    Observe the maximum permissible cable length

    Use a maximum of 10 m cable length.

    In the event of non-observance, compliance with legal requirements is not guaranteed. Faults and malfunctions along with exclusion from warranty can be the result.

    Further Information