S-0-0295 Drive enable delay time
The parameter contains the delay “Drive enable delay time”. This delay time starts as soon as bit 14 is set by S-0-0134. It delays the power supply of the motor by the set time. Within this time it is then possible to switch a contactor that may be present in the motor cable.
Attributes
|
Name |
Value |
|---|---|
|
Datatype |
udec |
|
Data length in bit |
16 |
|
Decimal point |
0 |
|
Min value |
0 |
|
Default |
0 |
|
Max value |
10000 |
|
Unit |
ms |
|
Changeable in EtherCAT state |
PreOp |
|
Cyclic transfer |
No |
|
Device parameter |
No |
|
Related to interface revision |
No |
 | Nested structure Note the nesting depth and the structure information at the start of the descriptions. |
| For further information please look into the involved IDN: |