Industrial PC
Fieldbus Components
Drive Technology
Servo drive
AX8000 | Multi-axis servo system
AX5000 | Digital Compact Servo Drive
AX5000 | Digital Compact Servo Drive 1. generation - Operating instructions
AX5000 | Digital Compact Servo Drives - System manual hardware 2
AX5000 | Digital compact servo drives - Function description
AX5000 | Digital compact servo drives - IDN-Description
AX5000 | Digital compact servo drives - Diagnostic Messages
Documentation notes
Introduction to the diagnostic system
Parameter channel diagnostics
1001, No valid IDN
1009, Invalid access to element 1
2001, No name
2002, Name transmission too short
2003, Name transmission too long
2004, Name cannot be changed, (read only)
2005, Name is write protected at this time
3002, Attribute transmission too short
3003, Attribute transmission too long
3004, Attribute cannot be changed, read only
3005, Attribute is write protected at this time
4001, No Unit
4002, Unit transmission too short
4003, Unit transmission too long
4004, Unit cannot be changed, read only
4005, Unit is write protected at this time
5001, No minimum input value
5002, Minimum input value transmission too short
5003, Minimum input value transmission too long
5004, Minimum input value cannot be changed, read only
5005, Minimum input value is write protected at this time
6001, No maximum input value
6002, Maximum input value transmission too short
6003, Maximum input value transmission too long
6004, Maximum input value cannot be changed, read only
6005, Maximum input value is write protected at this time
7002, Operation data value transmission too short
7003, Operation data value transmission too long
7004, Operation data value cannot be changed, read only
7005, Operation data value is write protected at this time
7006, Operation data value is smaller than the minimum input value
7007, Operation data value is greater than the maximum input value
7008, Invalid operation data
7009, Operation data is write protected by a password
700A, Operation data value is write protected
700B, Invalid indirect addressing
700C, Operation data is write protected due to other settings
700D, Reserved
7010, Procedure command already active
7011, Procedure command not interruptible
7012, Procedure command is at this time not executable
7013, Procedure command not executable
7014, No data state
8001, No default value
8002, Default value transmission too long
8004, Default value cannot be changed, read only
800A, Invalid drive number
800B, General error
800C, No element addressed
Device Diagnostics
Standard-Objects
AX5000 EMC-Manual - Version 1.1
AX5000 Tuning-Guide - Version 1.0
AX2090-MD50 | Motor choke
AX2090-ND50 | Mains choke
AX2090-NF50 | Mains filter
AX2090-BW5x | External brake resistor
AX5021 | Brake module
AX2090-BW65 | External brake resistor IP65
Distributed servo drives
Rotary servomotors
Translatory servomotors
Planetary gears
Transport systems
Compact drive technology
Archive
TwinCAT 3
TwinCAT 2
Industry Solutions
Search
News
Home