Disassembly

WARNING

Uncontrolled movers can cause serious injuries

After disabling the controller or switching off the power voltage, movers can move uncontrollably on a vertical track and cause serious finger injuries due to crushing and eye injuries due to flying fragments.

  • Establish a safe state of the system.
  • Make sure that all movers have come to a complete standstill.

WARNING

Risk of injury when disassembling the movers

Permanent magnets are installed in the magnetic plate sets of the movers. Be careful when disassembling the magnetic plate sets. Make sure that the magnetic plate sets cannot be pulled together by magnetic forces, and keep your hands clear of the space between them.

If you do not take care during the disassembly, opposite magnetic plate sets may attract each other without warning and injure your hands.

Disassembly 1:

Remove components from the products only for documented maintenance work

Components may be removed only for the documented maintenance tasks. Further information can be found in the chapter .
Only Beckhoff Automation GmbH & Co. KG is permitted to remove any other components.

For any further questions, please contact Beckhoff Service:

Disassembly 2:

service@beckhoff.com

Removing the components from the machine

Further information can be found in the chapter Transport and storage.