Before operation

Hazard resulting from magnetic fields

The magnetic fields of some of the components are dangerous to:

Maintain a safe distance from all magnetic components and prevent direct contact between magnetic components and components that are sensitive to interference.

Observe the requirements of BGV B 11 for electromagnetic fields (in Germany) and applicable national regulations in other countries.

Use output voltages SELV / PELV

Operate all electronic modules and components in the drive system only with a SELV (Safety Extra Low Voltage) or PELV (Protective Extra Low Voltage) output voltage.

Keep the surroundings clean

Keep your workplace and the surrounding area clean. Ensure safe working.

Secure the control cabinet

When working on machines, secure the control cabinet against inadvertent power-up.

Do not use damaged components

Observe the specifications in the technical data during storage, transport, and operation. Do not use damaged components.

Check safety pictograms

Check whether the designated pictograms are on the product. Replace missing or illegible stickers.

Observe tightening torques

Install connections and components in compliance with the specified tightening torques and check them cyclically.

Ground electrical components or modules correctly

Do not touch electrical components or modules unless you are wearing protective ESD clothing. Only walk on conductive floors.

Only use original packaging for further processing

Use the original packaging for dispatch, transportation, storage, and packing.