Assembly

Notice

Note mover type

The test board may only be attached to AT9014-1070-x550 movers. All other movers are not suitable for mounting the NCT electronics.

Assembly 1:
►Screw the test board [1] to the mover [3] with screws [2]
►Observe tightening torques:

Components

Tightening torque [Nm]

Screws, M6 x 20

4

Assembly 2:
►Plug the connector [1] of the cable bridge into the connection strip of the test board [2]
►Tighten screws [3] on the cable bridge