Settings of the trigger set

Settings of the trigger set 1:
►If required, enter a name for the trigger set in the input field Name
►Enter a threshold value in the input field Threshold
Settings of the trigger set 2:

Only selected parameters available

All previously selected parameters are listed in the drop-down menu Data.

Settings of the trigger set 3:
►Select a parameter in the drop-down menu Data for which the scope is to be recorded
Settings of the trigger set 4:
►Select And in the drop-down menu Combine if the conditions of all ANDed trigger sets are to be fulfilled

OR

►Select Or from the drop-down menu Combine if it is sufficient to fulfill the condition of a trigger set

ANDed links are treated before ORed links.

Settings of the trigger set 5:
►Select the trigger for the action in the drop-down menu Release

The following triggers are possible:

RisingEdge

Rising edge through X.

FallingEdge

Falling edge through X.

OnChangeEnds

End of a change.

TimeInterval

Time interval after which the Trigger Set is triggered.

Settings of the trigger set 6:
►Click on the button Go To Next Step to continue