Hardware
To implement XTS Track Management, you need at least one module with AT2002‑0249 connector in addition to several modules, to enable an air gap between the modules for the moving track section. In addition, one or more movers and a suitable mechanical system for the moving track section, such as a spindle axis or linear motor, are required.
The following components must be present in your XTS system to use Track Management:
- At least one shortened module with connector AT2002‑0249
- Cables with connectors
- Mover: AT9011-0x70, AT9014-0x70 or external Mover
For more information, refer to the chapter Configuration setup and the XTS original operating instructions:
|
