Start position and end position
A start position and an end position must be defined for each station. It makes a difference whether you have created a single part or multiple parts in your XTS system.
A single part
The following specifications must be observed for a single part:
- The value in the input field End Position On Last Part must be greater than the value in the input field Start Position On First Part
- The entered value in the input field End Position On Last Part can only be smaller than the entered value in the input field Start Position On First Part, if the part is added a second time to the Parts
Symbol | Explanation |
|---|---|
| Start position of the station, Start Position On First Part |
| End position of the station, End Position On Last Part |
Multiple parts
The following specifications must be observed for multiple parts:
- The start position is on the first part and the end position on the last part of the selected list
- The order of the parts must be selected according to their appearance in the XTS system. The parts must form a continuous line on which the movers can move
Further information can be found in chapter Add Part.
Symbol | Explanation |
|---|---|
| Start position of the station, Start Position On First Part |
| End position of the station, End Position On Last Part |
- ►Enter a value in the input field Start Position On First Part
- ►Enter a value in the input field End Position On Last Part