Assigning devices

Select the order of the devices according to their occurrence in the XTS system. In this example configuration, four parts with one device each are required. Two of these parts consist of one movable module and two further parts consist of four modules each, which form a 1 m long, fixed module segment.

Assigning devices 1:
►Click on the button + to add a device
Assigning devices 2:

The dialog box Choose Devices for Part... opens.

You have the possibility to filter the devices or to add only single infeed lines or modules to the selected part. You can choose from the following filters:

Select devices

Assigning devices 3:
►Click on the button Select devices to activate the filter
►Click on a device

OR

►Press and hold the Ctrl key to select multiple devices in the appropriate order

Select infeed lines

Assigning devices 4:
►Click on the button Select infeed lines to activate the filter
►Click on an infeed line

OR

►Press and hold the Ctrl key to select multiple infeed lines in the appropriate order

Select individual modules

Assigning devices 5:
►Click on the button Select individual modules to activate the filter
►Click on a module

OR

►Press and hold the Ctrl key to select multiple modules in the appropriate order



Assigning devices 6:
►Confirm with OK

To configure the XTS system with Track Management, three more parts must be configured.