Hidden Parameter (Init)
Parameter | Group | Type | PTCID | Explanation |
|---|---|---|---|---|
IdDiagConfiguration | MoverIdDetection | – | 0x03080100 | Configure the memory size of ID Detection in the dump file. Attention! Do not change. For more information, see IdDiagConfiguration. |
DelayBetweenMoversInPack | MoverIdDetection | LREAL | 0x03080247 | Time delay [s] between triggering movers which are directly next to each other within the MoverPackGap. Unit: s |
DelayBetweenMoverPacks | MoverIdDetection | LREAL | 0x03080248 | Time delay [s] between triggering movers simultaneously which are not in the same mover pack. Unit: s |
GapToDefineMoverPack | MoverIdDetection | LREAL | 0x03080249 | Gap [mm] between movers to define a new mover pack. Unit: mm |
CompletionCriteria | MoverIdDetection | MoverIdDetectionCompletionCriteria | 0x0308027B | Defines the criteria to complete the ID Detection. For more information, see CompletionCriteria. |
DumpWriterFallbackMode | Diagnostics | DumpWriterFallbackMode | 0x030802B2 | Gets/sets the mode which specifies if extra memory can be used to write a dump file or not. This may be used if the normal buffer for the dump is too small. |
IsPartBasedHandlingActivated | Advanced | BOOL | 0x03080284 | If enabled then the status and control of all terminals is evaluated based on parts. Attention! Beta functionality. |
IncludedTrackCheckTimeout | Advanced | UDINT | 0x03080293 | Gets/sets the timeout in seconds after which a warning is thrown, if no tracks are included to detection. Unit: s |