Before operation

Danger from magnetic fields

The magnetic fields of some of the components of the XTS are dangerous to:

• people fitted with cardiac pacemakers
• persons with magnetically conducting implants
• implanted and external defibrillators
• magnetic data storage devices, chip cards with magnetic strips and other electronic devices

Maintain a safety distance to all magnetic parts and prevent direct contact between magnetic parts and parts that are sensitive to interference.

Observe the requirements of BGV B 11 for electromagnetic fields (Germany) and applicable national regulations in other countries.

Use output voltages SELV / PELV

Operate all electronic modules and components in the drive system only with a SELV (Safety Extra Low Voltage) or PELV (Protective Extra Low Voltage) output voltage.

Keep the immediate environment clean

Keep your workplace and the surrounding area clean. Ensure safe working.

Shut down and secure the machine or plant

Shut down the machine or plant. Secure the machine or plant against being inadvertently started up.

Do not use damaged components

Adhere to the specifications from the technical data for storage, transport and operation. Do not use damaged components.

Risk of injury when handling cutting tools

You can sustain cutting or puncturing injuries through careless working with cutting tools.

Ensure safe working. Wear protective gloves if necessary.

Risk of injury when handling adhesives

Adhesive can irritate the eyes, the respiratory organs and the skin. Do not inhale the vapor. Avoid contact of the adhesive with the eyes and skin. If adhesive should get into your eyes, immediately rinse out your eyes thoroughly with water and consult a doctor.

Refer to the manufacturer's documentation when handling adhesives. Wear protective gloves and safety glasses if necessary.

Check safety pictograms

Check whether the designated pictograms are on the product. Replace missing or illegible stickers.

Observe tightening torques

Mount and repeatedly check connections and components, complying with the prescribed tightening torques.

Correctly ground electrical components or modules

Avoid electric shocks due to improper grounding of electrical components or modules. Ground all conductive components according to the specifications in the chapters "Electrical Installation" and "Mechanical Installation".

Use the original packaging only

When shipping, transporting, storing and packing, use the original packaging or non-conductive materials.