Preparation
Required tools
- Hex bit, 2.5 mm
- Hex bit, 3 mm
- Suitable torque wrenches for hex bits
- Cutting tool: scalpel OR hobby knife
- Adhesive: Elastosil E43 N
- Brush
- Clean, lint-free cloth
Approved lubricant
- Petrolatum
Required accessories [+]
- Rail mounting aid
![]() | Screw length depends on the machine bed used The length of the screws depends on the machine bed used. The screws must protrude between 10 and 13 mm into the motor module. |
Required installation material
- 2 x D5 locating pins, per motor module
- 3 x M5 screws per motor module
