Preparation

Required tools

• Hexagon bit size 2.5
• Hexagon bit size 3
• Allen key size 4
• Suitable torque wrench
• Liquid threadlocker

If the modules are mounted without an alignment gauge:

• Vernier caliper

Required accessories [+]

• Alignment gauge
• Rail on support

If modules with connectors are used for the infeed:

• Cables
• Assembly tool for B23 connectors

Further information can be found in chapter Accessories.

Screw length depends on the machine bed used The length of the screws depends on the machine bed used. The screws must protrude between 10 and 13 mm into the motor module.

Assembly material required

• 3x screws M5, per module