During operation

Observe the GND concept

Special conditions need to be observed for the grounding of the XTS. Further information can be found in chapter Earthing of the supply.

Do not work on live electrical parts

Ensure that the protective conductor is properly connected. Never disconnect electrical connections while they are live. Only work on the XTS when the voltage has dropped to < 10 V. Disconnect all components from the mains and secure against reconnection.

Do not touch hot surfaces

Check cooling of the surfaces with a thermometer. Do not touch the components during operation. Allow the components to cool down for at least 15 minutes after switching off.

Avoid overheating

Operate the components according to the technical specifications. Further information can be found in chapter Technical data. Ensure sufficient cooling and switch off the components immediately if the temperature is too high.