Magnetic plate set 10-pin

Motor modules¹⁾	Beckhoff mover			Third-party movers
Motor modules¹⁾
Straight	—⁴⁾	—⁴⁾	—⁴⁾	110²⁾	110²⁾
Straight, EcoLine	—⁴⁾	—⁴⁾	—⁴⁾	115³⁾	115³⁾
22.5° curved segment	—⁴⁾	—⁴⁾	—⁴⁾	110²⁾	110²⁾
-22.5° curved segment	—⁴⁾	—⁴⁾	—⁴⁾	110²⁾	110²⁾
45° curved segment	—⁴⁾	—⁴⁾	—⁴⁾	110²⁾	110²⁾
180° curved segment	—⁴⁾	—⁴⁾	—⁴⁾	—⁵⁾	—⁵⁾
180° curved segment, additional cooling	—⁴⁾	—⁴⁾	—⁴⁾	—⁵⁾	—⁵⁾

¹⁾	With and without infeed.
²⁾	Length of the magnetic plate set: 100 mm. The minimum gap is defined by the magnetic influence of the magnetic plate set and is 110 mm. Depending on the shape and length of the mover, a greater distance may be required.
³⁾	The minimum gap is defined by the EcoLine modules and is 115 mm for the magnetic plate set 10-pin. Depending on the shape and length of the mover, a greater distance may be required.
⁴⁾	Not possible. The 10-pin magnetic plate set must not be mounted on Beckhoff movers.
⁵⁾	Not possible. The 10-pin magnetic plate set must not be used with curved segments ≥45°.