Disassembly of the end plug

Notice

Avoid damage to the module

As the end plug is flush with the module, the end plug must be carefully removed with a needle. When removing the end plug, make sure that the module is not damaged and that the end plug is not pushed into the module.

►Carefully pierce the end plug [2] with a needle [1]

►Remove the end plug from the module

►Make sure that the end plug is not pushed into the module

Notice

Do not reuse removed end plugs

If the end plug has been removed with a needle, it will no longer seal the module correctly when it is refitted. A removed end plug must not be reused. Only fit new and undamaged end plugs.