Installation

Notice

Note mover type

The NCT electronics may only be attached to mover AT9014-1070-x550. All other movers are not suitable for mounting the NCT electronics.

If you mount the NCT electronics on other movers, damage to movers and modules may result.

Installation 1:
►Tighten the NCT electronics [1] to the mover [3] with screws [2]
►Observe tightening torques:

Components

Tightening torque [Nm]

Screws, M6 x 25

4

Installation 2:
►Plug the connector [1] of the cable bridge into the connection strip of the NCT electronics [2]
►Tighten screws [3] on the cable bridge