Magnetic plate set Mover 1

1) After mounting a magnetic plate set Mover 1, the Mover Standard assumes Mover 1 functionality and is recognized as servo axis 1.
Magnetic plate set	Number of magnets	Suitable mover types	Mover type after mounting the magnetic plate set
AT9001-1450-1640	4	AT901x-x0xx-0450¹⁾	AT901x-x0xx-1450
		AT901x-x0xx-1450	AT901x-x0xx-1450
		AT901x-x0xx-0550¹⁾	AT901x-x0xx-1450
		AT901x-x0xx-1550	AT901x-x0xx-1450
		Mover Standard¹⁾ from third-party manufacturers	Mover 1 from third-party manufacturers
		Mover 1 from third-party manufacturers	Mover 1 from third-party manufacturers
AT9001-1550-1640	5	AT901x-x0xx-0450¹⁾	AT901x-x0xx-1550
		AT901x-x0xx-1450	AT901x-x0xx-1550
		AT901x-x0xx-0550¹⁾	AT901x-x0xx-1550
		AT901x-x0xx-1550	AT901x-x0xx-1550
		Mover Standard¹⁾ from third-party manufacturers	Mover 1 from third-party manufacturers
		Mover 1 from third-party manufacturers	Mover 1 from third-party manufacturers
AT9001-1775-1640	7	Mover Standard¹⁾ from third-party manufacturers	Mover 1 from third-party manufacturers
AT9001-1775-1640	7	Mover 1 from third-party manufacturers	Mover 1 from third-party manufacturers
AT9001-1AA0-1640	10	Mover Standard¹⁾ from third-party manufacturers	Mover 1 from third-party manufacturers
AT9001-1AA0-1640	10	Mover 1 from third-party manufacturers	Mover 1 from third-party manufacturers

A 1.6 mm thick encoder flag is mounted on a magnetic plate of the magnetic plate set. If necessary, this must be replaced with a thicker or thinner encoder flag. Further information can be found in chapter Replacing the encoder flag.