Rail on support [+]
A pre-assembled lock is available for installing the movers on the guide rails. The lock must be removed before installing the movers and replaced with the rail on support [+] .
Installation
![Rail on support [+] 1:](Images/svg/18014404732614667__Web.svg)
- ►Remove screws [1]
- ►Remove lock [2]
- ►Insert rail on support [1]
- ►Insert screws [2] and hand-tighten them
![Rail on support [+] 2:](Images/svg/18014404732622347__Web.svg)
Once the rail on support has been fitted, the movers can be installed.
Disassembly
Once the movers have been installed, the rail on support must be removed and the lock mounted.
![Rail on support [+] 3:](Images/svg/18014404734701451__Web.svg)
- ►Remove screws [1]
- ►Remove rail on support [2]
- ►Insert lock [1]
- ►Insert and tighten the screws [2]
- ►Observe tightening torques:
![Rail on support [+] 4:](Images/svg/10032704267__Web.svg)
Components | Tightening torque [Nm] |
|---|---|
Screws, M4 x 10 | 3 |