Tile orientation

Notice

Insert the tile correctly

All tiles must have the same orientation in order to be able to control the movers. The coordinate origin is the same for each tile and is marked with a sticker

If a tile is not installed correctly, this will result in problems controlling the mover.

Tile orientation 1:

Position

Name

1

Sticker with coordinate origin

Make sure that all tiles have the same orientation. Use the coordinate origin [1] as a guide to align the tiles correctly.

Tile orientation 2:
►Position another tile [1] with the hole and the elongated hole on the locating pins [2]
►Observe coordinate origin [3]
Tile orientation 3:
►Fasten the additional tile [1] with two, four or six screws [2]
►Observe tightening torques

Component

Tightening torque [Nm]

Screws, M6

7






►Install additional tiles in the same way