Offset of the tiles

Offset of the tiles 1:

You have the option of arranging the tiles [1] with an offset of 40 mm to each other.

Offset of the tiles 2:
►Position another tile [1] with the hole and the elongated hole on the locating pins [2]
►Observe coordinate origin [3]

Further information can be found in chapter Tile orientation.

Offset of the tiles 3:
►Fasten additional tile [1] with four screws [2]
►Observe tightening torques:

Component

Tightening torque [Nm]

M6 screws

8






►Install additional tiles in the same way