Cover at pressing position

Stainless steel or plastic can be used for the cover at the pressing position.

If you want to perform press-in processes on the mover, you must fit a cover [3] between the mover [1] and the tile [2].

A press-in process on the mover without a cover between the mover [4] and the tile [5] is not permitted and can lead to damage to the mover and tiles.

There must be no dirt or foreign objects [1] between the mover [2] and the cover [3] or the tile [4]. All dirt and foreign objects on the underside of the mover and on the surface of the cover or tile must be removed before force is applied to the mover.