System test
Notice | |
Avoid wiring faults in the control cabinet First, only connect the 24 V supply to the tiles and check the tile function. Accidental connection of 380 - 500 V instead of 24 V can lead to the destruction of all tiles. |
- ►Connect the entire system to the power supply
- ►First connect only 24 V
- ►Check the tile function
- ►Make sure that the LEDs [1] and [2] light up
The following LEDs [1] must light up:
- 24 V Ok
The following LEDs [2] must flash if data cables have been plugged in:
- X101 IN
- X102 OUT
If the LEDs do not light up:
- ►Check the power supply units and fuses for voltage
- ►Contact the Support/Applications Department