Screws for installing the mechanical protection

WARNING

Ensure that the screws have the correct length

Make sure that the screws have the correct length to ensure that the mechanical protection is securely fastened.

If you use screws that are too short, the mechanical protection may come loose and the mover may leave the system in an uncontrolled manner, causing serious injury.

  • Only use screws of the correct length to avoid damage and injury.

Notice

Ensure that the screws have the correct length

Make sure that the screws have the correct length to avoid damage to the tile.

If you use screws that are too long, the tile may be damaged.

  • Only use screws of the correct length to avoid damage.
Screws for installing the mechanical protection 1:

Do not use magnetic screws

Only non-magnetic screws may be used to install the mechanical protection on the tile.

Screws for installing the mechanical protection 2:

The length [C] of the M6 screws [1] for fastening the mechanical protection depends on the depth [A] of the safety equipment [2] and the screw depth [B] in the tile [3].

The screws must be screwed between 6 and 9 mm into the tile.

Screws for installing the mechanical protection 3:

A = depth of the mechanical protection

B = screw depth in the tile: 6 to 10 mm

C = length of the screw

Further Information