Screws for installing the tiles

Notice

Ensure that the screws have the correct length

Ensure that the M6 screws have the correct length in order to obtain a flat surface on the tiles and to avoid damaging the tile.

Screws that are too long can damage the surface of the tile.

	Do not use magnetic screws Only non-magnetic screws may be used to mount the tile on the machine bed.

The length [C] of the M6 screws [1] for fastening the tile depends on the height [A] of the machine bed [2] and the screw depth [B] in the tile [3].

The screws must be screwed between 6 and 10 mm into the tile.

A = height of the machine bed

B = screw depth in the tile: 6 to 10 mm

C = length of the screw

Further Information