Accumulator

Accumulator.content

The main content of the accumulator consists of the following components:

1. Accumulator curve using the CurveEditor control
2. Area for setting the accumulator values
3. Area for displaying the current position
4. Area for showing and hiding a selected passive curve

Accumulator_Settings.content

In addition to the main page of the accumulator, there is also an additional page for the slider area. This content is split into three pages.

The first page contains the following components:

1. Setting the index, thickness, basic thickness and profile component as well as adding, removing and navigating between the existing fix points
2. Update option for curve limits
3. Switching the shift function on and off
4. Table for displaying the fix points
5. Undo changes, navigate between activated profiles and activation of the displayed profile

The second page contains the following components:

1. Adjustment of the envelope in negative and positive direction and switching in percent
2. Setting or display of the push-out mode

The third page contains the following components:

1. Setting or displaying the interpolation mode
2. Setting or displaying the product transition
3. Adjustment of the slopes
4. Adjustment of the editor options

Accumulator_Homing.content

The homing page for the accumulator consists of the following components:

1. Homing block
2. Homing block detection
3. Homing finish
4. Encoder zero offset shift

Using the function UpdateAxesHomingUnits from the Beckhoff.TwinCAT.HMI.Plastic.Functions NuGet package, certain units of the values are converted to angle unit groups if it is a transformed axis.

Accumulator_Homing_Settings.content

There is an additional page for the slider area in addition to the homing page of the accumulator. This page contains the following components:

1. Homing status display
2. Homing functions
3. Aborting the homing
4. Activation of the storage option

Available since version 12.7.0