Movement

Blowpin.content

The main page of the blow pin consists on the one hand of the use of the ArrowMotionGraph control and is used to set and display the blow pin movement in segments. The control allows the adjustment of velocity and position, acceleration and deceleration, as well as in both directions of movement with up to 5 segments each.

On the other hand, the blow pin main page contains the cam control twice, once for each direction of movement of the axis. The two controls are used to set and display the cams by entering the length and position per segment. Up to 5 segments can be added per control.

Movement 1:

Blowpin_Settings.content

In addition to the main page of the blow pin there is a supplementary page for the slider area. The content is divided into two pages.

The first page contains the following components:

  1. Activating and resetting the settings and add and remove segments of the blow pin movement
  2. Activating and resetting the settings of the cams in the downward movement of the blow pin
  3. Activating and resetting the settings of the cams in the upward movement of the blow pin
  4. Area for navigation to other related pages
Movement 2:

The second page contains the following components:

  1. Setting velocity values
  2. Setting torques for clamping
Movement 3:
Movement 4:

Available from version 12.6.0