ReactiveByVoltage

The parameters of the ReactiveByVoltage group are used to set the reactive power control depending on the voltage (see Reactive power control with voltage characteristic curve Q(U)).

Name	Default	Min	Max	Unit	Data type
`ReactiveByVoltagePoints`	[[96.0, 33.0],[104.0, -33.0]]			%	ARRAY[1..4, 1..2] OF REAL
`ReactiveByVoltagePoints`	Reactive power voltage characteristic curve (V/V_nom, Q/P_nom)
`ReactiveByVoltageDeadband`	0.0	0.0	5.0	%	REAL
`ReactiveByVoltageDeadband`	Sliding deadband around characteristic curve.
`ReactiveByVoltageOffset`	0.0	-20.0	+20.0	%	REAL
`ReactiveByVoltageOffset`	Offset of the voltage characteristic curve (V_Q0/V_nom)
`ReactiveByVoltageStrPower`	0.0	0.0	100.0	%	REAL
`ReactiveByVoltageStrPower`	Active power threshold for the start of reactive power support (0 = disabled)
`ReactiveByVoltageStpPower`	0.0	0.0	100.0	%	REAL
`ReactiveByVoltageStpPower`	Active power threshold for terminating reactive power support (0 = disabled)
`ReactiveByVoltageCosPhiMin`	0.0	0.0	1.0		REAL
`ReactiveByVoltageCosPhiMin`	Minimum permitted displacement factor for reactive power support