Schedules

All schedules are shown in a table. You can assign up to 8 groups or an area to each schedule. Depending on the control mode in the respective groups, a schedule can activate the group for sensor detection or switch the light directly.

Schedule name	Display of the schedule designation; changeable in the dialog. Display in green if the schedule is active.
Mo-Su	An "X" marks the days that were activated for the schedule.
Groups	All groups assigned to this schedule are displayed. Up to 8 groups can be assigned.
Scene	This scene is called up when the system is switched on. Optionally, you can select whether the scene should be switched off at switch-off time. Helpful for realizing several scene transitions.
Area	A schedule can be assigned an area here. The area can then be activated or blocked via this schedule. The group functions are disabled. The schedule can only be used again for other purposes when the area is "0" again.
Time: On	Switch-on point
Time: Off	Switch-off point
Enable	Enables the schedule. Disabled schedules are ignored and are invisible in the display.
Public holidays	Selected public holidays block the active schedule. Apart from the existing public holidays, you can enter your own special days.