Sensors
All sensors are distributed to several lines (at the same time the physical address).
Sensor | Display of the sensor designation; changeable in the dialog. |
Presence | Display in green if presence is detected. |
Brightness | Display of the currently measured light value. This value is not assigned to a unit and is not to be compared directly with Lux. |
Group | Display of all the groups that the sensor switches. |
Scene | Display of the scene that the sensor switches. |
Status | The status indicates whether the sensor has an error. |
Type | The type specifies the sensor model. You can select it from a drop-down menu in the sensor dialog. It is essential to select the correct type. |
Steinel Dali-2 | e.g.: Steinel IR Micro, IS3360, IS345 |
Steinel LiveLink | e.g.: Steinel LiveLink HF360, LiveLink Dual HF, LiveLink IR, LiveLink Quattro HD |
Steinel LS | e.g.: Steinel LiveLink light sensor |
Steinel US | e.g.: Steinel LiveLink Dual US |
BEG Luxomat | B.E.G. BMS: PD11-BMS-FLAT, PICO-BMS, PD2N-BMS, PD4-BMS, PD4N-BMS, PD4-BMS-GH, PD4-BMS-K, LC-Mini 120 BMS Osram Dali-2 |
Tridonic MSensor | Tridonic MSensor |
Extern Input | Conventional sensors or your own logics for triggering the presence can be linked via the PLC. See the section on Programming. |
Esylux | e.g.: PD-C 360/8 BMS DALI-2: Presence + brightness |
Range | The value must be between 0 and 255. The higher the value, the larger the range of the detector. For HF/US sensors only. |
Sensitivity | The value must be between 0 and 15. The smaller the value, the more sensitively the sensor reacts. For HF/US sensors only. |
Enable | Enables the sensor. Disabled sensors are ignored and are invisible in the display. Enablement causes the simultaneous disablement of the corresponding Dali push button coupler on the same line and address. |
