Circuits

All circuits are shown in a table. Up to 30 circuits can be integrated (at the same time the physical output GVL_LS_IO.bCircuit[x]). The voltage (230 V, 24 V, etc.) that should be present at the output is irrelevant for the function.

The output is switched as soon as one of the four groups is active.

The group value is output simultaneously in percent, analog and as DMX value. This means that dimmer terminals (KL2751, KL2761 or 0..10V Analog Output terminals) can be integrated directly; for DMX terminals (EL6851) further programming is required.

 

Circuits 1:

 

Circuit

Display of the circuit designation; changeable in the dialog.

Maintenance

Circuits 2:

Display in red if the maintenance mode is active.

Lamp

Circuits 3:

Display in yellow if the circuit is switched on.

Percent

Display in percent.

Groups

All groups assigned to these circuits are displayed. Up to 4 groups can be assigned. The group "0" has no effect.

Maintenance mode

The maintenance mode for the circuit can be activated individually in the Circuits dialog. The circuit can be switched on or off.

Enable

Enables the circuit. Disabled circuits are ignored and are invisible in the display.