WriteRegisters_UDINT

This FB writes multiple UDINT registers on the camera. Requires the same endianness for the specified registers and an open control channel (e.g. by calling FB_VN_GevCameraControl.OpenCamera() before).

Syntax

Constructor:

WriteRegisters_UDINT(
    OTCID oidITcVnGevImageProvider
)

Execute main:

FB_Main()

FB_Main(
    GVCP_ADDRESS_VALUE_PAIR* pAddressValuePairs,
    USHORT                   nArraySize,
    bool                     bWrite
)

FB_Main(
    bool bWrite
)

Inputs

Name	Type	Default	Description
pAddressValuePairs	GVCP_ADDRESS_VALUE_PAIR*		An array containing address/value pairs of the registers that should be written
nArraySize	USHORT		Number of address/value pairs in pAddressValuePairs
nEndian	USHORT		OPTIONAL: The endianness of the registers. 0 = Big, 1 = Little. Default: 0
bWrite	bool		Writing the registers is triggered by a rising edge at this input.
nTimeout	unsigned int	VISION_ADS_TIMEOUT	Indicates the time before the function is cancelled.

Outputs

Name	Type	Description
bBusy	bool	This output remains TRUE until the function block has executed a command, but at the longest for the duration supplied to the 'nTimeout' input. While bBusy = TRUE, no new command will be accepted at the inputs.
bError	bool	This output is switched to TRUE as soon as an error occurs during the execution of a command. The command-specific error code is contained in ‘nErrorId’. If the function block has a timeout error, 'bError' is TRUE and 'nErrorId' is 1861 (hexadecimal 0x745). Is reset to FALSE by the execution of a command at the inputs.
nErrorId	ULONG	Contains the ADS error code or the command-specific error code of the last executed command. Is reset to 0 by the execution of a command at the inputs.

Required License

TC3 Vision Base