Multiplexed data
Multiplexed signals defined in the DBC file (see fig. Multiplexed Signals) are accepted into the Prepared DBC Signals node as normal signals.
![Multiplexed data 1:](Images/png/2346195211__Web.png)
The demultiplexing procedure is carried out as follows on arrival of the corresponding CAN message:
- if the message contains multiplexed signals, the multiplexer of the message is evaluated and only the signals that the frame contains are copied according to the multiplexer.
- Multiplex signals not contained in the frame are not updated
The multiplexing procedure (when transmitting messages), is initiated by changing a multiplexed signal before transmitting the message:
- If the signal that was changed is a multiplexed signal, the signal is copied to the corresponding position in the frame and the multiplexer signal is set to the multiplex value of this signal.
- The CAN frame is sent.