TwinCAT 3 | 4024

Software version It cannot be guaranteed that all the functions explained here are implemented in TwinCAT 3 | 4024. The development of the TF5890 | TwinCAT 3 XPlanar for TwinCAT 3 | 4024 was completed with version 4.2.xxx. If you want to use all functions, install TwinCAT 3 | Build 4026 and the latest version of TF5890 | TwinCAT 3 XPlanar.

Before you can commission an XPlanar system, you must first install the TF5890 | TwinCAT 3 XPlanar software. The following steps are also required when updating to the latest version of TF5890 | TwinCAT 3 XPlanar.

If you have already installed a software version, check if you have installed the latest version. Further information can be found in chapter Check version.

As a prerequisite for the installation, a version of TwinCAT 3 XAE (TcXaeShell) or a compatible Microsoft Visual Studio that is integrated with TwinCAT 3 XAE must be available on your system.

You can find the latest version of the software in the download finder:

In addition to the TF5890 | TwinCAT 3 XPlanar software, the TF5430 | TwinCAT 3 Planar Motion software must also be installed on your system. Further information can be found in the TF5430 TwinCAT 3 | Planar Motion documentation:

Whether you first install the TF5430 | TwinCAT 3 Planar Motion or the TF5890 | TwinCAT 3 XPlanar software is not relevant.