Parameterisation
Required input parameters
Input parameters | Description |
@P1 | Reference plane (absolute) |
@P2 | Retraction plane (absolute) |
@P3 | Safety clearance (relative to the reference plane, unsigned) |
@P4 | Final drilling depth (relative to the reference plane, unsigned) |
Optional input parameters
Input parameters | Description |
@P17 | Dwell time at final drilling depth (in seconds) |
@P92 | Retraction mode (default value = 1) 0: Retract at rapid traverse 1: retract at feed rate |
It is recommended to use the Syntax check to verify whether the input parameters are correctly assigned.