Programming

The TAPERLINK option permits synchronisation between the reference path and the s3econdary path in a 2-path configuration in order to obtain the optimum wire angle. See [FCT-C49, section: Description].

The condition for using this function is a 2-path configuration and selection of tool radius compensation using G41 or G42.

Syntax:

#TRC [ [TAPERLINK=..] ]

TAPERLINK =..

Define mode for the taper link function.

0: Taper link function inactive (default).

1: Taper link active: Compensation is active on both paths; automatic detection.

2: Taper link active: Reference path compensates the secondary path.

3: Taper link active: Secondary path compensates the reference path.