Contour deviation

A contour deviation is determined by axis errors. Provided the same Vibration Guard Mode was selected for each axis in the axis group, an axis error is dependent on the following factors:

• Cycle time (longer cycle time = greater error)
• Natural frequency (lower natural frequency = greater error)
• Feed rate (greater feed rate = greater error)

The following options are available to influence an axis error or contour deviation:

• Adapt the influencing factor described above (cycle time, natural frequency, feed rate).
• Assign the same Vibration Guard parameters to all axes in an axis group (if they have different settings).
• Activate automatic tolerance monitoring.