Special application
Data exchange for PLC spindles over the channel-specific HLI range
There is no single axis interpolator for the controller in this configuration. It is possible to command PLC spindles directly by means of the NC channel.
Parameter
P-CHAN-00069 | PLC-controlled spindle |
Example
Special application
Spindle S1 is defined as a PLC spindle.
Initialising in the channel parameter list
:
spindel[0].plc_control 1
spindel[0].bezeichnung S1
spindel[0].log_achs_nr 1
:
Any logical axis number is possible but it must be unequal to 0 and it may not already be assigned to any other axis.
No axis parameter list is required for this kind of PLC spindle.