Overview

ID	Parameter	Description
P-AXIS-00014	abs_pos_gueltig	Identification code for absolute path measurement system
P-AXIS-00015	achs_mode	Operation mode of an axis
P-AXIS-00036	cam_direct_access	Access to reference cam
P-AXIS-00038	cam_level	Signal level for reference cam signal
P-AXIS-00064	fast_from_cam	Slow / fast movement down to reference cam
P-AXIS-00074	gantry_slave_no_homing	Suppress homing for gantry slave axis
P-AXIS-00084	homing_without_zero_pulse	Homing with or without zero pulse signal
P-AXIS-00152	pos_refpkt	Position of the reference point
P-AXIS-00156	ref_ohne_nocken	Homing with or without reference cam
P-AXIS-00157	ref_ohne_rev	Homing with or without reverting >
P-AXIS-00158	ref_richt	Motion direction when homing
P-AXIS-00161	rpf_weg_bis_nip	Distance up to receipt of zero pulse with simulated homing
P-AXIS-00218	vb_reflow	Slow velocity of homing
P-AXIS-00219	vb_refmax	Fast velocity of homing
P-AXIS-00294	homing_overflow_evaluation	Homing on encoder overflow
P-AXIS-00299	homing_type	Homing type
P-AXIS-00321	reference_cam_signal	Receipt of reference cam signal (SERCOS only)
P-AXIS-00354	encoder_overlow_offset	Encoder overflow offset
P-AXIS-00355	encoder_bit_range	Encoder bit width for referencing to encoder overflow
P-AXIS-00386	drive_supports_cnc_homing	Executing CNC-controlled homing with zero pulse latch via S-0-146 (SERCOS only).
P-AXIS-00387	cnc_homing_rt_bit_layout	Assigning real-time control and status bits to the CNC-controlled homing with zero pulse latch via S-0-146 (SERCOS only).
P-AXIS-00388	cnc_homing_encoder	Defining the encoder used for homing.
P-AXIS-00412	homing_max_movement_dist	Maximum permitted distance for homing.
P-AXIS-00425	reference_check.bit_nr	Bit number of the bit used for reference monitoring
P-AXIS-00426	reference_check.-element_name	Name of the cyclic process data element in which the reference signal is transferred.
P-AXIS-00494	shift_offset_zero_pulse_activation	Delayed activation of zero pulse logic for CNC-controlled homing.