ID 120479

The first block at the start of a circular area definition must be linear.

Description

The first motion block after starting a definition of a circular area must be linear.

A circular area definition consists of a linear block as starting point and a circular block as circle description.
See also [PROG// Section: Monitoring the workspace and protection space] and [FCT-C14// Section: Description].

 

Example with error:
%circular area
N10 #CONTROL AREA BEGIN [ID51 PROT CIRC MIN_EXCU…
N20 G02 G162 I70 J150
N30 G01 X150 Y200 F10000
N40 #CONTROL AREA END
N50 M30
Corrected example:
%circular area
N10 #CONTROL AREA BEGIN [ID51 PROT CIRC MIN_EXCU…
N20 G01 X150 Y200 F10000 (start point)
N30 G02 G162 I70 J150
N40 #CONTROL AREA END
N50 M30

Response

Class

2

Abort NC program processing.

Solution

Class

6

Check and modify the area definition in the NC program.

Parameter

%1:

Identification number [-]

Area ID

%2:

Expected value [-]

Intersection of polygon lines

%3:

Error value [-]

 

Error type

1, Error message from NC program.