ID 90065

Compensation movement found, enable contour masking process.

Description

To detect contour violations in linear blocks, the direction of the programmed motion block is compared with the direction of the corrected motion block. If the directions are opposite, this means a contour violation. The movement opposite to the programmed direction is called compensation movement.

This type of motion was detected and the contour masking process activated.

See [PROG// Section: Limits of TRC]

The principle of the outline fading out consists of removing the loop from the corrected path. For this purpose, the contour masking buffers a certain number of blocks corrected via the TRC. If the tool radius compensation recognizes a balance movement with active outline fading out, she marks the motion block and continues with the calculation of correction.

Response

Class

1

Abort NC program processing.

Solution

Class

1

Possibility: Modification of NC Program

Possibility: Use a tool with a smaller radius

Error type

1, Error message from NC program.