ID 20701
Double programmed G301/G302 without motion block. | |||
Description | A motion block must always be programmed between two NC commands G301/G302 so that a chamfer or rounding can be inserted. Without this motion block these is not possible. Example: Wrong: %kont
N10 X0 Y0
N20 X100
N30 G301 I20
N40 G301
N50 Y100
N60 X200
N99 M30
Correct: %kont
N10 X0 Y0
N20 X100
N30 G301 I20
N40 Y100
N50 G301
N60 X200
N99 M30
| ||
Response | Class | 1 | Continue NC program processing. |
Solution | Class | 1 | Remove superfluous G301/G302 or insert motion blocks. |
Error type | 1, Error message from NC program. | ||
| |||