Overview of parameters
The following parameters are available to adjust filters in the axis parameter record:
ID | Description |
|---|---|
Activates standard filter | |
Characteristic frequency of a filter | |
Quality of the filter | |
Order of the filter | |
Filter characteristic | |
Signal component that is routed through the filter | |
Type of the filter | |
- Use with standard filters: - Use with HSC filters: | |
Enables standard filter of the additional interface | |
Characteristic frequency of an additional interface filter | |
Quality of the additional interface filter | |
Order of the additional interface filter | |
Filter characteristic of the additional interface | |
Type of the additional interface filter | |
Signal component that is routed through the filter | |
- Use with standard filters of the additional interface: - Use with HSC filters: |
Parameter | Standard filters | HSC filters |
X | - (**) | |
X (*) | X (*) | |
X (*) | - | |
X | X | |
X | X | |
X | X | |
X | X | |
X (*) | X |
(*) Depending on the filter type
(**) Activated via NC command
The relevant filter parameters for each filter type are:
Filter type | Order | Charact. frequency | Prototype | Time constant | Quality | Signal component |
Low-pass | X | X | X |
|
| X |
High-pass | X | X | X |
|
| X |
Band-stop | X | X | X |
| X | X |
Band-pass | X | X | X |
| X | X |
All-pass | X | X | X |
|
| X |
PT1 | (X) |
|
| X |
| X |
PT2 | (X) |
|
| X |
| X |
Delay | (X) |
|
| X |
| X |
HSC mean* | X |
| X | X |
| X |
HSC NoVib* | (X) | X | X | (X) |
| X |
(X) only to active the filter; order is calculated internally
* Can only be used as axis filter