Interpolation Channel

Click on the interpolation channel to display the following dialogs:

”Online" tab

All the axes in the current Interpolation Group will be listed. Currently shown:

Actual positions
Set positions
Following errors
Set velocities and
Error Codes

"Override" tab

The channel override for the axes can be read and set on the 'Override' page. If PLC is running and the cyclical channel interface is being written, the override set here will be overwritten by the PLC.

Further information on the override principle can be found under Path override (interpreter override types).

The spindle override is described by the cyclic channel interface, although it is currently not supported.