ItpResetFastMFunc

ItpResetFastMFunc 1:

This function block represents an alternative to Auto-reset or reset with another M-function (reset list during parameterization of the M-function). For the sake of clarity, mixed operation involving resetting with an M-function and this function block should be avoided.

The fast M-function nMFuncNo is reset with a rising edge at input bExecute. In the event of the M-function not being available, no error is returned.

ItpResetFastMFunc 2:

Outdated version

The sole purpose of the function block is to ensure compatibility with existing projects. For new projects please use the function block ItpResetFastMFuncEx.

ItpResetFastMFunc 3: Inputs

VAR_INPUT
    bExecute       : BOOL;
    nChnId         : UDINT;
    nMFuncNo       : UINT;
    tTimeOut       : TIME;
END_VAR

Name

Type

Description

bExecute

BOOL

The command is triggered by a rising edge at this input.

nChnId

UDINT

Channel ID

nMFuncNo

UINT

Flying M-function that is to be reset.

tTimeOut

TIME

ADS Timeout-Delay

ItpResetFastMFunc 4: Outputs

VAR_OUTPUT
    bBusy     : BOOL;
    bErr      : BOOL;
    nErrId    : UDINT;
END_VAR

Name

Type

Description

bBusy

BOOL

This output remains TRUE until the function block has executed a command, but at the longest for the duration supplied to the 'Timeout' input. While Busy = TRUE, no new command will be accepted at the inputs. Please note that it is not the execution of the service but its acceptance whose time is monitored.

bErr

BOOL

This output is switched to TRUE as soon as an error occurs during the execution of a command. The command-specific error code is contained in 'nErrId'. Is reset to FALSE by the execution of a command at the inputs.

nErrId

UDINT

Contains the command-specific error code of the most recently executed command. Is reset to 0 by the execution of a command at the inputs. The error numbers in ErrId can be looked up in the ADS error documentation or in the NC error documentation (error codes above 0x4000).

Requirements

Development environment

Target platform

PLC libraries to be linked

TwinCAT v3.1.0

PC or CX (x86 or x64)

Tc2_NCI