CfgReconfigAxis

The CfgReconfigAxis function block returns a single axis from, for example, a 3D group, to its personal PTP group.

Interface

VAR_INPUT
    bExecute       : BOOL;
    nAxisId        : UDINT;
    tTimeOut       : TIME;
END_VAR

bExecute: The command is triggered by a rising edge at this input.

nAxisId: ID of the axis to be returned

tTimeOut: ADS Timeout-Delay

VAR_OUTPUT

VAR_OUTPUT
    bBusy     : BOOL;
    bErr      : BOOL;
    nErrId    : UDINT;
END_VAR

bBusy: This output remains TRUE until the function block has executed a command, but at the longest for the duration supplied to the 'Timeout' input. While Busy = TRUE, no new command will be accepted at the inputs. Please note that it is not the execution of the service but its acceptance whose time is monitored.

bErr: This output is switched to TRUE as soon as an error occurs during the execution of a command. The command-specific error code is contained in ‘nErrId’. Is reset to FALSE by the execution of a command at the inputs.

nErrId: Contains the command-specific error code of the most recently executed command. Is reset to 0 by the execution of a command at the inputs. The error numbers in ErrId can be looked up in the ADS error documentation or in the NC error documentation (error codes above 0x4000).

Requirements

Development environment	Target platform	PLC libraries to be linked
TwinCAT v3.1.0	PC or CX (x86 or x64)	Tc2_NCI